Thứ 6, 09/10/2026
Administrator
2
Thứ 6, 09/10/2026
Administrator
2
How many liters of transmission fluid are required for a Kia Morning? Distinguish between the drained volume, total system capacity, and the amount of fluid used based on the vehicle version and maintenance method.
The amount of transmission fluid needed for a Kia Morning depends on the specific transmission version and maintenance procedures.The capacity stated in the specifications table does not necessarily mean the amount of oil that needs to be refilled after a single draining cycle.Therefore, before buying oil or comparing quotes, it's necessary to determine what quantity the garage is referring to.
This article helps car owners distinguish between three commonly confused concepts: system capacity, the amount of oil drained, and the total amount of oil used during the oil change.
You shouldn't find a single number and apply it to every Morning. New Morning brochure from Kia VietnamThere are 5MT and 4AT versions. These are two different types of transmissions, and you need to check the oil requirements and capacity separately.
Before asking for the number of liters, please prepare the following:
Year of manufacture and version of the vehicle.
Manual or automatic transmission?
Are these cars domestically distributed or imported?
Transmission code, if identified.
Expected tasks: draining/recharging, removing the crankcase, or post-repair maintenance.
If you're unsure about the difference between AT and MT oil selection, you can refer to the manual. Distinguishing between AT, CVT, DCT, and MT transmission fluids..
For reference, here is the lubricant table in the Picanto MY24 document published by Kia:
Source: Kia Picanto MY24 owner's manual, section Recommended lubricants and capacities.
These figures are not the standard intake-exhaust values for all Kia Morning models in Vietnam.It is necessary to verify the correct make, engine, market, and documentation of the vehicle being serviced.
If you find a specification of 6.1 liters online, don't immediately conclude that you need to buy and fill the oil with the full 6.1 liters for this oil change.
This is the amount of oil associated with the entire system, according to the configuration and measurement conditions specified by the manufacturer.
With automatic transmissions, the oil isn't just in the oil pan; it's also involved in other circuits and components. Therefore, simply opening the drain plug doesn't mean all the oil in the system has been drained.
This is the actual amount of oil removed during the operation being performed. A single draining of the crankcase and a maintenance procedure involving the removal of additional parts do not necessarily remove the same amount of oil.
The question to ask the garage is:"Which method are these liters intended for?"
A quote indicating fewer liters than the system specifications isn't enough to conclude the garage underfilled. Conversely, a quote indicating more liters isn't enough to conclude that the method is more suitable for your vehicle.
If the process involves multiple oil drain-fill or oil exchange cycles using equipment, the total amount of oil used may differ from the final amount of oil remaining in the transmission.
The oil exchanger can work with both the oil in the torque converter and the heat exchanger, as described by MotulEvo systemHowever, the device's capabilities do not mean that every vehicle needs to adopt this method.
When receiving a price quote, you should request that the following be clearly stated:
Estimated amount of oil to be used.
Alternative method.
Work done.
Additional supplies are included, if needed.
How to check the oil level after maintenance.
The correct way to determine the amount to buy is to consult the correct transmission maintenance manual, identify the procedure, and then check the oil level according to the protocol.
You shouldn't use a fixed ratio of system capacity to calculate for every vehicle. Nor should you simply measure the old oil drained and assume you'll refill it with the exact same amount: if the oil level before maintenance was incorrect, this method can perpetuate the error.
Kia notes that both insufficient and excessive AT fluid can cause operational problems. Fluid levels must be checked according to the specified conditions. Picanto maintenance guide.
Since we don't have specific information about the car, we shouldn't set a single intake-exhaust fuel consumption rate for all Morning models.
Knowing how many liters are needed isn't enough. The oil selected must meet the gearbox's technical requirements.
You can refer to the information. GARTZ ATF G4To begin the comparison, however, the product name "4-speed transmission fluid" does not automatically prove suitability for all Morning 4ATs.
Check the vehicle requirements and current product technical documentation. Only confirm use when there is clear evidence of compatibility; do not replace compatibility checks with vehicle brand names or model numbers.
Both viscosity and quality requirements need to be checked. It's not a given that all Morning MTs use 75W-85, nor should you change the viscosity or quality grade simply because the product belongs to the same gear oil group.
Post 75W-85 manual transmission fluid and things to note when choosing GL-4This helps you understand the information you need to compare before choosing a product.
"What oil grade does my car require?"
The answer should be based on vehicle information and relevant documentation, not just "All Morning models use this type."
"Which method does this quote apply to?"
Clarify the charging and discharging procedures, the items to be removed and reinstalled, and the total amount of fuel used.
"After the oil change, how is the oil level checked?"
The requirement is to perform a thorough inspection of the gearbox according to established procedures, instead of simply filling it with the purchased number of bottles.
These three questions help compare quotes for the same scope of work.
No. A parameter in a document cannot be used as a benchmark for all versions and all alternative methods.
It's too early to draw a conclusion. We need to know the method, the amount of oil added according to the procedure, and the results of the oil level check.
Assessment should not be based solely on equipment or fuel consumption. The method used must be appropriate for the transmission, vehicle condition, and technical specifications.
Please provide the year of manufacture, version, transmission type, and region. If further investigation is needed, you can provide the VIN via private message.
To know how many liters of transmission fluid are needed for a Kia Morning, you need to answer two questions correctly first:What type of transmission does the car use, and what maintenance methods will be used?
Don't equate system capacity with fill-out/fill-out rates. When choosing a product, check the technical requirements first, then determine the oil quantity and get a price quote.
Reference GARTZ gearbox oil catalogAlternatively, you can submit your vehicle information to receive assistance in matching products and maintenance needs.
Share: