Car Overheating: Causes and How to Handle It

What is Car Overheating?

Overdrive is a condition where the engine speed increases abnormally, even when the driver does not press the accelerator. In particular, the vehicle will continue to run at high rpm without driver control, increasing the possibility of engine wear and can cause dangerous situations.

The phenomenon of gas burst can be divided into two main types:

Station station: When the vehicle is idling, the engine speed still increases abnormally, often exceeding 1,500 rpm.

The train is moving.: Engine speed is stable when the vehicle is idling but increases uncontrollably when the vehicle is running.

Causes of Car Overheating

There are many reasons that lead to the phenomenon of stalling in cars. Below are common factors that cause the car to stall:

Idle valve
The idle valve is responsible for regulating the flow of air into the engine when the vehicle is idling. If this valve is dirty or damaged, it will not close properly, allowing too much air and fuel to enter, causing the engine to rev abnormally high.

Throttle
The throttle valve controls the amount of fuel and air going into the engine. When the throttle valve is worn, dirty, or stuck, it won't close properly, allowing more fuel to be delivered to the engine than is needed, causing throttle to surge.

Throttle position sensor
This sensor helps transmit signals to the ECU to control the amount of fuel and air into the engine. If this sensor is faulty or damaged, the ECU will receive incorrect signals and lead to the phenomenon of throttle.
Other causes
Additionally, other causes may include a fault in the electronic fuel injection system, damaged bypass lines, or improperly maintained parts.

How to Handle a Vehicle That Has a Gas Surge

When your car is experiencing a stalling problem, it is important to determine the cause in order to handle it properly. Here are some common solutions:

Clean and replace the idle valve: If the idle valve is dirty or stuck, it must be cleaned or replaced to ensure proper operation.

Throttle cleaning: The throttle should be cleaned periodically to avoid dirt or jamming. Make sure the throttle is completely closed.
Check and replace the sensor: The throttle position sensor may be faulty and should be checked and replaced if necessary. Make sure the sensors are working properly to avoid problems.

How to Prevent Your Vehicle from Overshooting

To prevent the situation of gas, car owners need to maintain the car regularly. Pay special attention to cleaning the idle valve, throttle and checking the sensors. Regular car maintenance will help increase engine life and avoid unwanted problems during operation.

Gartz Engine Oil Products Help Protect Your Engine

To help your engine run smoothly and avoid conditions like stalling, useGartz engine oilHigh quality is an optimal solution. Gartz engine oil helps protect the engine, reduce friction and wear, help the vehicle run smoothly and save fuel. Gartz engine oil is sure to be a reliable companion on all your trips!

Conclude

A car that is stalling not only reduces performance but can also be harmful to the engine and the safety of the driver. To handle it effectively, you need to determine the exact cause and apply the appropriate repair method. Don’t forget to have your car serviced regularly to ensure it is always ready and running smoothly.

If you need advice or assistance with oil and vehicle maintenance, Gartz is here to help.

Contact Gartz today for better care for your car!